Forum Donations
Search
VTF Google Search
 Click Here

535 Resurrection Problems

  • Advertisement

Post a reply

535 Resurrection Problems

PostAuthor: immortuiventris » Wed Dec 06, 2017 6:48 pm

Hello everyone.
This post is about my 90' 535 that i just finished rebuilding.
So. I finished almost everything except from the minor oil leaks (unto it) , fuel electrical petcock-diafragm-headache thing , and...electricity.
So facts first.
Measured Stator. Passed
Measured R/r . Kept changing results every half second, reminding me of a certain ex of mine. Dumped and Replaced with xlv650's rectifier.
Tried Riding. FAILED
Battery dead after approx 15 km. At first the bike was running perfectly. After about 5 kilometers ,each time i was stoping at a light or stop, the bike would sputter when trying to start rolling again. Evaded it dying on my by playing with the throttle a bit to keep it running. Stopped for fuel. BOOM. No power to turn starter.

Replaced battery with my 250s battery for a test ride. Same story.

Suggestions? I was so hyped when i started with this project. When i first got this bike it looked like it was momentarily dropped in the sea or something. Now it looks like it just came out of the factory and I get so disappointed with all this trouble with the electrical problems. Been working on this for 4 months already and im running out of funds and patience :\
Last edited by immortuiventris on Thu Dec 07, 2017 9:18 am, edited 1 time in total.
XV 250 '88 Route 66 (The Good)

XV 535 '91 UK (The Bad)

Me (The Ugly)

Hailing from Greece

immortuiventris
Junior Membership
Junior Membership
 
Posts: 7
Images: 3
Joined: Thu Sep 28, 2017 2:02 pm
Location: Athens - Greece Flag
Bike year & model: xv250 Route 66 1988
xv535 1991
Sex: Male

Re: Electrical DeadEnd

PostAuthor: bstig60 » Wed Dec 06, 2017 9:08 pm

Route 66 battery probably too small. Sounds like a bad R/R. The proper unit for this bike is Yamaha 42X-81960-A1-00 RECTIFIER REGULATOR ASSEMBLY
You can find a replacement on Ebay. https://www.ebay.com/itm/Voltage-Regula ... 1947533730 ... The unit you have off the 650 is the wrong one, hopefully, you didn't burn out the stator.

Please edit your profile to show your location.
Bill
"It´s a friggen motorcycle, it´s not supposed to be comfortable, quiet or safe. The wind noise is supposed to hurt your ears, the seat should be hard and riding it should make you s**t your pants every now and then. "

Please take the time to edit your profile to show your location. City, State/Province and Country. It is easier to help you if we know where you are.

SERVICE MANUAL DOWNLOAD LINK
http://viragotechforum.com/viewtopic.php?f=220&t=31501#p279545

Image
User avatar
bstig60
Mod
Mod
 
Posts: 12083
Images: 38
Joined: Sun Jun 08, 2008 6:16 pm
Location: Nevada City, California Flag
Bike year & model: 1999 Yamaha Virago XV1100LC Cruiser
2003 Honda Goldwing GL1800 Touring
Sex: Male

Re: Electrical DeadEnd

PostAuthor: Jake » Thu Dec 07, 2017 12:13 am

Never heard using the Honda R/R , did you check the charging voltage after installing the Honda R/R ?
Forum Tutorials can be found here http://viragotechforum.com/viewforum.php?f=177

Forward Control Templates ( FREE ) http://viragotechforum.com/viewtopic.php?f=124&t=21556


“It ain’t what you don’t know that gets you in trouble. It’s what you know for sure that just ain’t so.”
~Mark Twain
User avatar
Jake
Mod
Mod
 
Posts: 10931
Images: 112
Joined: Wed Jun 06, 2007 3:18 pm
Location: PA Flag
Bike year & model: 1996 XV750
Sex: Male

Re: Electrical DeadEnd

PostAuthor: immortuiventris » Thu Dec 07, 2017 3:28 am

Spoke to a couple of electricians here and did a thorough search online and found out i can indeed use another rectifier. for example the previous owner was using the 250s rr.
The present rr is giving me 13.7 or a bit lower (something like 13.4) on idle.
XV 250 '88 Route 66 (The Good)

XV 535 '91 UK (The Bad)

Me (The Ugly)

Hailing from Greece

immortuiventris
Junior Membership
Junior Membership
 
Posts: 7
Images: 3
Joined: Thu Sep 28, 2017 2:02 pm
Location: Athens - Greece Flag
Bike year & model: xv250 Route 66 1988
xv535 1991
Sex: Male

Re: Electrical DeadEnd

PostAuthor: Jake » Thu Dec 07, 2017 7:09 am

Using another R/R is usually not a problem, as long as the amperage is sufficient to power the electrical system and keep, the battery charged, the 250 R/R may have been a little light for the 535.

The one commonly used here is a mosfet type Shindengen FH020AA, it's a definite upgrade.

I wonder if you have a bad ground connection. Double check your ground and maybe add a 2nd one from the battery to the frame.
Forum Tutorials can be found here http://viragotechforum.com/viewforum.php?f=177

Forward Control Templates ( FREE ) http://viragotechforum.com/viewtopic.php?f=124&t=21556


“It ain’t what you don’t know that gets you in trouble. It’s what you know for sure that just ain’t so.”
~Mark Twain
User avatar
Jake
Mod
Mod
 
Posts: 10931
Images: 112
Joined: Wed Jun 06, 2007 3:18 pm
Location: PA Flag
Bike year & model: 1996 XV750
Sex: Male

Re: Electrical DeadEnd

PostAuthor: jonno51 » Thu Dec 07, 2017 7:52 am

The one commonly used here is a mosfet type Shindengen FH020AA, it's a definite upgrade.[/quote]

Or you could order a brand new one, specific to the 535 from http://www.electrexworld.com

Their RR48 is a MOSFET type r/r

This might help too
You do not have the required permissions to view the files attached to this post.
Damned if I do, bored if I don't - 95 XV1100
User avatar
jonno51
Junior Membership
Junior Membership
 
Posts: 97
Joined: Fri Dec 02, 2016 4:02 pm
Location: North Yorkshire, England Flag
Bike year & model: 1995 xv 1100 4PP Japan home market model
Sex: Male

Re: Electrical DeadEnd

PostAuthor: immortuiventris » Thu Dec 07, 2017 9:16 am

Ok im gonna rename the thread to get help with other problems that have surfaced too.

Regarding the charging problem, im now draining the engine of the fluid to inspect the stator, (and fix some oil leakage i found).

On another matter, the engine is overheating too much. To the point that you can barely poke the side of the cylinders with your palm before you get burned...
I suspect the mixture is too lean? Any way to setup the carbs easily? I already synced them but im getting a hard time from finding the ideal pilot screw setting..
XV 250 '88 Route 66 (The Good)

XV 535 '91 UK (The Bad)

Me (The Ugly)

Hailing from Greece

immortuiventris
Junior Membership
Junior Membership
 
Posts: 7
Images: 3
Joined: Thu Sep 28, 2017 2:02 pm
Location: Athens - Greece Flag
Bike year & model: xv250 Route 66 1988
xv535 1991
Sex: Male

Re: 535 Resurrection Problems

PostAuthor: immortuiventris » Thu Dec 07, 2017 9:22 am

Image



This is culprit..
XV 250 '88 Route 66 (The Good)

XV 535 '91 UK (The Bad)

Me (The Ugly)

Hailing from Greece

immortuiventris
Junior Membership
Junior Membership
 
Posts: 7
Images: 3
Joined: Thu Sep 28, 2017 2:02 pm
Location: Athens - Greece Flag
Bike year & model: xv250 Route 66 1988
xv535 1991
Sex: Male

Re: 535 Resurrection Problems

PostAuthor: jonno51 » Fri Dec 08, 2017 5:30 am

immortuiventris wrote:Image



This is culprit..


Looking good. Much better with some of the chrome painted over.
Damned if I do, bored if I don't - 95 XV1100
User avatar
jonno51
Junior Membership
Junior Membership
 
Posts: 97
Joined: Fri Dec 02, 2016 4:02 pm
Location: North Yorkshire, England Flag
Bike year & model: 1995 xv 1100 4PP Japan home market model
Sex: Male

Re: 535 Resurrection Problems

PostAuthor: eslmatt » Fri Dec 08, 2017 7:59 am

Reminds me of some girls I know... pretty but a complete mess where it counts :) I was smart enough to stay away.

You said it looked like it was dropped in the ocean... was it? have you cleaned the contacts and all that? Ever thought of doing your own wiring harness?
1984 VX750 Japanese special - stolen - RECOVERED
build thread -> http://viragotechforum.com/viewtopic.php?f=32&t=58187&sid=e4ab82933609aa211c1efb06cf000508

2010 Jailing 110 customized

Image
When asking how, also tell me why.

eslmatt
Senior Membership
Senior Membership
 
Posts: 382
Images: 26
Joined: Wed Jun 11, 2008 9:05 am
Location: Jilin, China Flag
Bike year & model: 1986+ xv750 Japanese special
Sex: Male

Re: 535 Resurrection Problems

PostAuthor: immortuiventris » Fri Dec 08, 2017 3:21 pm

i am actually in the proccess of making one, but untill then (being a cook, i dont really have a lot of time for that ) im using the old one. Yep i checked all the contacts , cleaned them , replaced whatever didnt satisfy me to the slightest.
XV 250 '88 Route 66 (The Good)

XV 535 '91 UK (The Bad)

Me (The Ugly)

Hailing from Greece

immortuiventris
Junior Membership
Junior Membership
 
Posts: 7
Images: 3
Joined: Thu Sep 28, 2017 2:02 pm
Location: Athens - Greece Flag
Bike year & model: xv250 Route 66 1988
xv535 1991
Sex: Male



Post a reply


  • Advertisement

Return to Yamaha Virago XV535

Who is online

Registered users: Baidu [Spider], Google [Bot], Majestic-12 [Bot], rhino_81, Yahoo [Bot]