Forum Donations
Search
VTF Google Search
 Click Here

Got carb tuning problems , peep this

Virago Ninja - Wrenchin' Secrets & Help Tips! http://Virago.Ninja
  • Advertisement

Post a reply

Re: Got carb tuning problems , peep this

PostAuthor: Jake » Mon Jun 04, 2018 1:53 pm

Nope, not dead, works for me, I just tried it.
_______________________________________________________________________
“It ain’t what you don’t know that gets you in trouble.
It’s what you know for sure that just ain’t so.”

~Mark Twain


Mustang saddle, Yamaha driving lights, Red rear signals, Forward Controls,
XVS650 manual petcock, Hard Krome Double D exhaust.
User avatar
Jake
Mod
Mod
 
Posts: 13079
Images: 108
Joined: Wed Jun 06, 2007 3:18 pm
Location: Penn's Forestland otherwise known as Pennsylvania Flag
Bike year & model: 1996 XV750
Sex: Male

Re: Got carb tuning problems , peep this

PostAuthor: Xinsofacto7 » Mon Sep 07, 2020 6:51 pm

If running stock pipes with drilled out baffles (not removed just drilled) is this enough to need rejetting?

Xinsofacto7
Junior Membership
Junior Membership
 
Posts: 7
Joined: Sat Sep 05, 2020 9:43 am
Location: Long Beach CA Flag
Bike year & model: Yamaha Virago 750 ‘82
Sex: Male

Re: Got carb tuning problems , peep this

PostAuthor: turbodog » Mon Sep 07, 2020 10:27 pm

Idle and low speed jetting was lean from the factory to meet EPA limits. Even a stock bike worked better with the pilot screws turned out a turn or so from the factory setting.So any thing that causes it to run even a little leaner is going to be an issue if you don't compensate at least with the pilot screws. If they are tuned out 1.5 - 2 turns from stock and it still stumbles or backfires thru the carb when you give it gas - then it is time to go a step richer on the idle jets. Drilling the baffles will not require a change to main jets or needles in all likelihood.
'83 XV920 Virago "Spare Parts Bike" Now sidecar tug with Vetter Terraplane hack
'81 XV920R, Resto-mod, back on the operating table.
User avatar
turbodog
Mod
Mod
 
Posts: 1135
Images: 26
Joined: Mon Oct 15, 2007 4:54 pm
Location: Dallas, TX Flag


Previous

Post a reply


  • Advertisement

Return to Virago Ninja - Wrenchin' Secrets & Help Tips

Who is online

Registered users: No registered users