Forum Donations
Search
VTF Google Search
 Click Here

TR1 front caliper bolts (SOLVED)

General Virago Help Topics
  • Advertisement

Post a reply

TR1 front caliper bolts (SOLVED)

PostAuthor: Baldrick » Sat Feb 09, 2019 4:04 am

Hello all, anyone know the exact thread size for TR1 front caliper bolts.
I need 4 of these and would have an easier time if i knew the thread pitch etc.
Cheers in advance for any help.

Baldrick
Junior Membership
Junior Membership
 
Posts: 42
Images: 16
Joined: Sat Dec 01, 2018 8:45 am
Location: Czech Republic Flag
Bike year & model: 1983 Virago. Xv 750
Sex: Male

Re: TR1 front caliper bolts

PostAuthor: mark75 » Sun Feb 10, 2019 7:10 pm

https://www.mrcycles.com/oemparts/a/yam ... ke-caliper
shows it to be an M8 x 12mm bolt

M8 specs ---> https://www.fastenermart.com/understand ... eners.html

Understanding Metric Fasteners
Fastener Tech Data | Understanding Series Introduction

The size of a metric screw or bolt is specified as diameter, pitch and length, in millimeters (millimeters is abbreviated "mm"). For nuts, size will appear as diameter and pitch. There is an exception though—if pitch isn't specified, the fastener is coarse threaded. Consider this size…

M8-1.0 x 20

Here's what the description means…

M = Metric thread designation

8 = Nominal diameter, in millimeters

1.0 = Pitch (distance from thread to thread), in millimeters

20 = Length, in millimeters (see below)

This example illustrates how a coarse threaded screw may appear…

M12 x 25 = 12 mm diameter, coarse thread is assumed (1.75 mm), 25 mm long

M12 is a matching coarse threaded nut

(To avoid confusion, we always include the thread pitch for both coarse and fine metric fasteners.)

If you normally work with inch fasteners, pitch can be a little confusing—pitch is the distance between adjacent threads. In the example above, a pitch of 1.0 means that from one thread to the next thread, the distance is 1.0 millimeter. Inch fasteners are described as threads per inch, which is sometimes mistakenly called pitch. If you need to know the threads per inch of a metric fastener, first convert pitch from millimeters to inches (multiply by 0.03937), then divide 1 by that number.
Or, use the table below…

Table 1. Fastener thread pitch in millimeters and inches.

Pitch: Pitch: TPI:
(mm) (inches) Threads per Inch
0.2 0.0079 127.00
0.25 0.0098 101.60
0.3 0.0118 84.67
0.35 0.0138 72.57
0.4 0.0157 63.50
0.45 0.0177 56.44
0.5 0.0197 50.80
0.6 0.0236 42.33
0.7 0.0276 36.29
0.75 0.0295 33.87
0.8 0.0315 31.75
1.0 0.0394 25.40
1.25 0.0492 20.32
1.5 0.0591 16.93
1.75 0.0689 14.51
2.0 0.0787 12.70
2.5 0.0984 10.16
3.0 0.1181 8.47
3.5 0.1378 7.26
4.0 0.1575 6.35
4.5 0.1772 5.64
5.0 0.1969 5.08
5.5 0.2165 4.62
6.0 0.2362 4.23
"Over the Mountains of the Moon,
Down the Valley of the Shadow,
Ride, boldly ride" ... E.A. Poe


Time flies >>> whether you're having fun __ :bike: or not :fan: ---

Any day above ground is a good day.
so Laissez les bon temps roulez. just roll safely --- Semper Vigilans...always watchful

"I hear and I forget, I see and I remember, I do and I understand." ... Confucius*

If you don't read the news you are not informed.
If you read the news you are misinformed.
... Mark Twain


-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The views, opinions, and experiences expressed in this post are mine and may not necessarily represent views and opinions of other VTF members, so feel free to agree, disagree, or ignore them.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
User avatar
mark75
Mod
Mod
 
Posts: 15722
Images: 15
Joined: Sun Apr 02, 2006 3:57 am
Location: Republic of Texas Flag
Bike year & model: 1982 - XV750
2013 - FXDC Super Glide Custom
*
Sex: Male

Re: TR1 front caliper bolts

PostAuthor: nanno » Mon Feb 11, 2019 1:05 am

Sorry Mark,

but that's definitely wrong. The bolts are M10-bolts, it's just a matter of the thread pitch.

Baldrick, as I said on some other communication channel - try the banjo bolt from the brake mastercylinder. If that one works, it's M10x1.25 .

Cheers,
Greg
http://viragotechforum.com/viewtopic.php?f=12&t=43227 - Nanno's accumulated findings (and blatant show-off) - infos on my TR1's, my performance and reliability mods and a bit of show-casing of the stainless steel exhausts I build

http://greasygreg.blogspot.co.at (My blog - Greasygreg.blogspot.co.at)
User avatar
nanno
Silver Membership
Silver Membership
 
Posts: 1219
Joined: Thu May 26, 2011 4:06 pm
  Flag
Bike year & model: 1981 Yamaha TR1
1982 Yamaha TR1 Turbo
1977 XS 750 Sidecar
1984 XT500 4Valve (Austrian Tax saving edition)
1979 RD250/R5/DS7-hodgepodge (in bits)
Sex: Male

Re: TR1 front caliper bolts

PostAuthor: Baldrick » Mon Feb 11, 2019 4:57 am

Nice one Greg

Banjo bolt fits perfect, will try to source here now somewhere.

Cheers, solved

Baldrick
Junior Membership
Junior Membership
 
Posts: 42
Images: 16
Joined: Sat Dec 01, 2018 8:45 am
Location: Czech Republic Flag
Bike year & model: 1983 Virago. Xv 750
Sex: Male



Post a reply


  • Advertisement

Return to Virago Help "Gen"

Who is online

Registered users: No registered users